Cisco TelePresence SX80 Administrator's Guide

D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
109
Cisco TelePresence SX80 Administrator Guide
H323 settings
H323 Authentication Mode
Define the authenticatin mode for the H.323 profile.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: The system will not try to authenticate itself to a H.323 Gatekeeper, but will still try a
normal registration.
On: If an H.323 Gatekeeper indicates that it requires authentication, the system will try
to authenticate itself to the gatekeeper. Requires the H323 Authentication LoginName
and H323 Authentication Password settings to be defined on both the codec and the
Gatekeeper.
H323 Authentication LoginName
The system sends the H323 Authentication Login Name and the H323 Authentication
Password to an H.323 Gatekeeper for authentication. The authentication is a one way
authentication from the codec to the H.323 Gatekeeper, i.e. the system is authenticated to
the gatekeeper. If the H.323 Gatekeeper indicates that no authentication is required, the
system will still try to register. Requires the H.323 Authentication Mode to be enabled.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 50)
The authentication login name.
H323 Authentication Password
The system sends the H323 Authentication Login Name and the H323 Authentication
Password to an H.323 Gatekeeper for authentication. The authentication is a one way
authentication from the codec to the H.323 Gatekeeper, i.e. the system is authenticated to
the gatekeeper. If the H.323 Gatekeeper indicates that no authentication is required, the
system will still try to register. Requires the H.323 Authentication Mode to be enabled.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 50)
The authentication password.
H323 CallSetup Mode
Defines whether to use a Gatekeeper or Direct calling when establishing H.323 calls.
Direct H.323 calls can be made also when H323 CallSetup Mode is set to Gatekeeper.
Requires user role: ADMIN
Default value: Gatekeeper
Value space: Direct/Gatekeeper
Direct: You can only make an H.323 call by dialing an IP address directly.
Gatekeeper: The system uses a Gatekeeper to make an H.323 call. When choosing this
option, the H323 Gatekeeper Address must also be configured.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

System settings

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g