EasyManuals Logo

Cisco TelePresence SX80 Administrator's Guide

Cisco TelePresence SX80
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #128 background imageLoading...
Page #128 background image
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
128
Cisco TelePresence SX80 Administrator Guide
Provisioning settings
Provisioning Connectivity
This setting controls how the device discovers whether it should request an internal or
external configuration from the provisioning server.
Requires user role: ADMIN, USER
Default value: Auto
Value space: Internal/External/Auto
Internal: Request internal configuration.
External: Request external configuration.
Auto: Automatically discover using NAPTR queries whether internal or external
configurations should be requested. If the NAPTR responses have the "e" flag, external
configurations will be requested. Otherwise internal configurations will be requested.
Provisioning Mode
It is possible to configure a video system using a provisioning system (external manager).
This allows video conferencing network administrators to manage many video systems
simultaneously. With this setting you choose which type of provisioning system to
use. Provisioning can also be switched off. Contact your provisioning system provider/
representative for more information.
Requires user role: ADMIN, USER
Default value: Auto
Value space: Off/Auto/CUCM/Edge/Spark/TMS/VCS
Off: The video system is not configured by a provisioning system.
Auto: Automatically select the provisioning server.
CUCM: Push configurations to the video system from CUCM (Cisco Unified
Communications Manager).
Edge: Push configurations to the video system from CUCM (Cisco Unified
Communications Manager). The system connects to CUCM via the Collaboration Edge
infrastructure.
Spark: Push configurations to the video system from Spark.
TMS: Push configurations to the video system from TMS (Cisco TelePresence
Management System).
VCS: Push configurations to the video system from VCS (Cisco TelePresence Video
Communication Server).
Provisioning LoginName
This is the username part of the credentials used to authenticate the video system with the
provisioning server. This setting must be used when required by the provisioning server.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 80)
A valid username.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings

Table of Contents

Other manuals for Cisco TelePresence SX80

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence SX80 and is the answer not in the manual?

Cisco TelePresence SX80 Specifications

General IconGeneral
Maximum frame rate60 fps
Supported video modes720p, 1080p
Video formats supportedH.261, H.262, H.263, H.264, H.265
Supported graphics resolutions1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecsG.711, G.722, G.722.1, G.729ab
Noise reductionYes
HDMI ports quantity5
DVI-D ports quantity1
USB 2.0 ports quantity2
Product colorSilver
Rack capacity1U
Number of persons0 person(s)
Analog signal format systemNTSC, PAL
Security algorithmsHTTPS, SSH
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocolsSIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Sensor type-
Image sensor size- \
Weight and Dimensions IconWeight and Dimensions
Depth309.8 mm
Width442 mm
Height44 mm
Weight3650 g

Related product manuals