Cisco TelePresence SX80 - Security configuration

D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
63
Cisco TelePresence SX80 Administrator Guide
Real-time communication requirements for displays
We have put in a lot of effort to minimize the camera to screen
delay on our TelePresence endpoints, and also to detect
and compensate for total delay between the audio and video
components.
We recommend that you use displays with low delay to increase
the naturalness of communications. We also recommend that you
test a sample before ordering a large number of displays.
Delay through most displays is often very high (>100 ms) and is
therefore detrimental to real-time communication quality.
The following display settings may reduce the delay:
• Activate Game mode, PC mode or similar modes that are
designed to reduce the response time and normally also the
delay
• Deactivate motion smoothing, like Motion Flow, Natural Motion,
or any other video processing that introduces additional delay
• Deactivate advanced audio processing, like Virtual Surround
effects and Dynamic Compression, which will make any
acoustic echo canceller malfunction
• Change to a different HDMI input
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Peripherals