Cisco TelePresence SX80 Administrator's Guide

D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
75
Cisco TelePresence SX80 Administrator Guide
Sign in to the web interface, navigate to Maintenance > System
Recovery and select the Remote Support User tab.
The remote support user should only be enabled for
troubleshooting reasons when instructed by Cisco TAC.
Create a remote support user
About the remote support
user
In cases where you need to diagnose
problems on the video system you can
create a remote support user.
The remote support user is granted read
access to the system and has access to
a limited set of commands that can aid
troubleshooting.
You will need assistance from Cisco
Technical Assistance Center (TAC) to
acquire the password for the remote
support user.
Create remote support user
1. Click Create user.
2. Open a case with Cisco TAC.
3. Copy the text in the Token field and send
it to Cisco TAC.
4. Cisco TAC will generate a password.
The remote support user is valid for seven
days, or until it is deleted.
Delete remote support user
Click Delete user.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Maintenance

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g