Cisco TelePresence SX80 - xStatus commands

D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
142
Cisco TelePresence SX80 Administrator Guide
SystemUnit settings
SystemUnit Name
Define the system name. The system name will be sent as the hostname in a DHCP request
and when the codec is acting as an SNMP Agent.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 50)
Define the system name.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

System settings