Cisco TelePresence SX80 Administrator's Guide

D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
13
Cisco TelePresence SX80 Administrator Guide
System configuration changes in CE8.1
New configurations
Audio Input HDMI [n] VideoAssociation MuteOnInactiveVideo
Audio Output Line [n] Delay DelayMs
Audio Output Line [n] Delay Mode
Cameras PresenterTrack CameraPosition Pan
Cameras PresenterTrack CameraPosition Tilt
Cameras PresenterTrack CameraPosition Zoom
Cameras PresenterTrack Connector
Cameras PresenterTrack Enabled
Cameras PresenterTrack PresenterDetectedStatus
Cameras PresenterTrack TriggerZone
Logging External Mode
Logging External Protocol
Logging External Server Address
Logging External Server Port
Security Session MaxSessionsPerUser
Security Session MaxTotalSessions
SIP Ice OfferTcpCandidates
Configurations that are removed
Conference VideoBandwidth MainChannel Weight
SIP Turn BandwidthProbe
Configurations that are modified
Conference DefaultCall Rate
OLD: Default value: 1920
NEW: Default value: 3072
Conference DoNotDisturb DefaultTimeout
OLD: Integ er (0..1440)
NEW: In teger (1..14 40)
Conference VideoBandwidth PresentationChannel Weight
OLD: Integ er (1..10)
NEW: Integer (1..9)
FacilityService Service [1] Name
OLD: Default value: “”
NEW: Default value: “Live Support”
SIP DisplayName
OLD: String (0, 255)
NEW: String (0, 550)
Time Zone
Change: The list of time zones is updated. The information in the value space is from
the tz database, also called the IANA Time Zone Database.
UserInterface OSD Output
OLD: Default value: 1
NEW: Default value: Auto
UserInterface Wallpaper
OLD: <Custom / None>
Default value: None
NEW: <Auto / Custom / None>
Default value: Auto
Video Input Connector [n] PresentationSelection
OLD: <Manual / OnConnect>
NEW: <AutoShare / Manual / OnConnect>
All configurations that were associated with the USER user role in CE8.0, are now
associated with both the USER and ADMIN user roles. So all configurations that were
designated for the USER user role, are now included with the ADMIN role too.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g