Cisco TelePresence SX80 - Page 22

D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
22
Cisco TelePresence SX80 Administrator Guide
Sign in
Enter user name and passphrase for the endpoint and
click Sign In.
The system is delivered with a default user
named admin with no passphrase. Leave the
Passphrase field blank when signing in for the
first time.
It is mandatory to set a password for the
admin user.
Sign out
Hover the mouse over
the user name and
choose Signout from
the drop-down list.
The web interface is the administration portal for
the video system. You can connect from a computer
and administer the system remotely. It provides full
configuration access and offers tools and mechanisms
for maintenance.
Note: The web interface requires that HTTP or HTTPS
is enabled (refer to NetworkServices > HTTP > Mode
setting).
We recommend that you use the latest release of one
of the major web browsers.
Connect to the video system
Open a web browser and enter the IP address of the
video system in the address bar.
How to find the IP address
1. Select the settings icon (cogwheel) in the
status bar of the Touch controller.
2. Select Settings > System Information.
How to administer the video system (page 2 of 4)
The web interface of the video system
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction