D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
54
Cisco TelePresence SX80 Administrator Guide
Enable and disable Snap to Whiteboard
An administrator can enable and disable the Snap to Whiteboard
feature, either using the Touch controller or the web interface.
The feature cannot be switched on and off by the user, neither
during a meeting, nor between one meeting and the next.
1. Tap the settings icon (cogwheel) in the status bar of the Touch
controller and open the Settings menu.
2. Tap Administrator, and sign in with administrator credentials.
3. Tap Tracking.
4. Set Snap to Whiteboard to ON if you want the camera to
capture both the person that talks and the whiteboard he or
she is standing next to.
Set Snap to Whiteboard to OFF if you want only the person
that talks to be captured.
Alternatively, use the Cameras > SpeakerTrack > Whiteboard
> Mode setting on the web interface to switch the Snap to
Whiteboard feature On and Off.
Switch on and off speaker tracking
Speaker tracking, which can be switched on and off by the user
at any time, must be switched on for the Snap to Whiteboard
extension to work.
Tap the camera icon in the status bar of the Touch controller, and
use the toggle button to switch speaker tracking on and off.
Set up the Snap to Whiteboard feature (page 3 of 3)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
