EasyManuals Logo

Cisco TelePresence SX80 Administrator's Guide

Cisco TelePresence SX80
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
70
Cisco TelePresence SX80 Administrator Guide
Software release notes
For a complete overview of the news and changes, we
recommend reading the Software Release Notes (CE8).
Go to: http://www.cisco.com/c/en/us/support/
collaboration-endpoints/telepresence-quick-set-series/tsd-
products-support-series-home.html
Sign in to the web interface and navigate to Maintenance >
Software Upgrade.
Upgrade the system software (page 2 of 2)
About software versions
This video conference system is using CE
software. The version described in this
document is CE8.2.x.
Install new software
Download the appropriate software package and store it
on your computer. This is a .pkg file.
1. Click Browse... and find the .pkg file that contains the
new software.
The software version will be detected and shown.
2. Click Install software to start the installation process.
The complete installation normally take no longer than
15minutes. You can follow the progress on the web
page. The video system restarts automatically after the
installation.
You must sign in anew in order to continue working with
the web interface after the restart.
Download new software
For software download, go to the
Cisco Download Software web page:
http://www.cisco.com/cisco/software/navigator.html.
Then navigate to your product.
The format of the file name is “s52020ce8_2_x.pkg. Each
software version has a unique file name.
Check software version
The software version shows here
when you have selected a file.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Maintenance

Table of Contents

Other manuals for Cisco TelePresence SX80

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence SX80 and is the answer not in the manual?

Cisco TelePresence SX80 Specifications

General IconGeneral
Maximum frame rate60 fps
Supported video modes720p, 1080p
Video formats supportedH.261, H.262, H.263, H.264, H.265
Supported graphics resolutions1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecsG.711, G.722, G.722.1, G.729ab
Noise reductionYes
HDMI ports quantity5
DVI-D ports quantity1
USB 2.0 ports quantity2
Product colorSilver
Rack capacity1U
Number of persons0 person(s)
Analog signal format systemNTSC, PAL
Security algorithmsHTTPS, SSH
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocolsSIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Sensor type-
Image sensor size- \
Weight and Dimensions IconWeight and Dimensions
Depth309.8 mm
Width442 mm
Height44 mm
Weight3650 g

Related product manuals