Setup procedures (part 3)
9390 Reference manual 7-3
Password Option
GPS Allows your transceiver to send and receive
GPS position and GPS beacon calls. The
selcall option must be enabled.
S
(Selcall)
Allows your transceiver to send and receive
selective calls (beacon, telcall, selcall and
page).
SL
(Selcall
Lockout)
Selcall lockout reduces call interference. It
applies to all types of selective call (beacon,
selcall, telcall, GPS, page and ALE). Refer
to the 9390 User guide, Chapter 7, Selcall
lockout. The selcall option must be enabled.
After you have enabled an option, you may need to use other
Setup mode procedures to enter settings that control the
option.
You can remove an enabled option by repeating the
procedure and entering the password again.
To Next Page
Loading...
Need help?
General
