Codan 9390 - Page 120

Setup procedures (part 3)
7-4 9390 Reference manual
To enable a transceiver option:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 42
numeral
buttons
The display shows your
transceiver 14-digit ID.
Example of the display:
EXIT
PASSWORD
ENTER
A630–9A00–0000–DD
– – – – – – – – – – – –
3.
Contact your Codan agent
and request the password
for the transceiver option
you want to enable.
The Codan agent will ask you
for personal identification and
your transceiver ID.
4.
Enter the password
numeral
buttons
Example of the display:
EXIT
PASSWORD
ENTER
A630–9A00–0000–DD
1364 1524 4466