Link Setup mode
9-8 9390 Reference manual
Action Notes
2.
Enter 1
Chan
1
If a PIN is currently set, the
display shows:
EXIT ENTER
Enter Old Pin
– – – – – –
If no PIN is currently set, the
display shows:
EXIT ENTER
Enter New Pin
– – – – – –
3.
Is a PIN already set?
Yes
Step 4.
No
Step 6.
4.
Enter the current PIN
numeral
buttons
5.
Press
F2
The transceiver ‘beeps’ twice
and switches off if you enter
the wrong PIN. Switch the
transceiver on and repeat the
procedure.
To Next Page
Loading...
