Codan 9390 User Manual

Link Setup mode
9-14 9390 Reference manual
Action Notes
4.
Press
F2
The display looks like one of
the following:
EXIT
Press F2 to confirm:
RESET
Delete all
unprotected channels
EXIT
Press F2 to confirm:
RESET
Reset user settings
to factory defaults
EXIT
Press F2 to confirm:
RESET
Reset user settings,
delete all channels
To exit this procedure without
resetting anything, press
F1
5.
To start the reset, press
F2
The display shows:
LINK SETUP MENU
1–Pin
2–Inhibit
ENTER
3–Antenna
4–Reset
6.
Exit Link Setup mode. See Link Setup mode enter/exit
on page 9-2.


Codan 9390 Specifications

General

Brand	Codan
Model	9390
Category	Transceiver
Language	English