Codan 9390 User Manual

Display messages
10-6 9390 Reference manual
Message Meaning Action
Loading ALE
data
The transceiver is loading
information from the 9300
ALE controller.
Wait for loading to finish.
Low battery The battery voltage has
dropped below 10 volts.
Recharge or change the battery.
No ALE scan
table
No channels have been set
up in the ALE scan table.
To set up an ALE scan table, see
Chapter 3, Creating a scan table
(set scan type ‘
ALE
’).
No calls
available
Either selective calling has
not been enabled or no
selcall group is assigned to
this channel.
See Chapter 7, Password entry to
enable transceiver options. For
changing channel settings, see
Chapter 3, Changing channel
options. Select one of the selcall
groups S1–S5. If the channel is
protected, contact your Codan
agent for help.
No channels
fitted
No channels have been set
up in the transceiver.
Contact your Codan agent for
help.
No deflt rec for
XX
The transceiver could not
read a default record.
Switch the transceiver off and
then on again. If the problem
remains, contact your Codan
agent for help.
No destination
ID
No selcall called ID has
been set up.
Refer to the 9390 User guide,
Chapter 5, Selcall for how you
enter the selcall ID of the station
you want to call.

Codan 9390 Specifications

General

Brand	Codan
Model	9390
Category	Transceiver
Language	English