Codan 9390 User Manual

Display messages
10-8 9390 Reference manual
Message Meaning Action
Parallel
EEPROM bad
Data in the parallel
E
2
PROM has become
corrupted.
Contact your Codan agent for
help.
Program
inhibited
The selected channel is
protected from deletion.
If you want to copy this channel
to another channel number, see
Chapter 3, Copying a channel to
a new channel number. If you
need help, contact your Codan
agent.
PTT cutout Transmission time has
exceeded the set limit.
If you want to change the time
limit, see Chapter 7, PTT
transmit cutout.
PTT inhibited The selected channel is a
receive-only channel.
Select another channel if you
want to transmit.
Queue full The internal task queue is
full.
Switch the transceiver off and
then on again. If the problem
remains, contact your Codan
agent for help.
RAM fault The transceiver cannot read
data from the parallel
RAM.
Contact your Codan agent for
help.
RTC Ck/Sum
Err
The transceiver detected a
real time clock checksum
error.
Switch the transceiver off and
then on again. Check the clock’s
lithium backup battery. If the
problem remains, contact your
Codan agent for help.
S’call mute
disabled
Selcall mute availability is
switched off.
To make selcall mute available,
see Chapter 8, Selcall mute
availability on/off.

Codan 9390 Specifications

General

Brand	Codan
Model	9390
Category	Transceiver
Language	English