Codan 9390 User Manual

Display messages
10-10 9390 Reference manual
Message Meaning Action
Tone is disabled You cannot send a tone call
because no tone call group
has been assigned to this
channel.
To assign a tone call group to this
channel, see Chapter 3,
Changing channel options.
Transmit
inhibited
The selected channel is a
receive-only channel.
Select a channel enabled for
transmission.
Tune abort Antenna tuning has been
cancelled because the
PTT
button on the microphone
has been pressed.
If necessary, tune the antenna
again.
Tune fail Antenna tuning failed. Check the position of the antenna
(for example, too close to
buildings), then press the
Tune
button to tune the antenna again.
Tune pass The antenna was
successfully tuned.
None.
Tuner fault The transceiver failed to
tune the antenna within two
minutes.
Check the installation (for
example, cables to the antenna
tuner), then press the
Tune
button to tune the antenna again.
If the problem remains, contact
your Codan agent for help.
Tuning
The
Tune
button was
pressed and the antenna is
now being tuned.
None.
Unknown error:
XX
The transceiver detected an
unknown data error.
Contact your Codan agent for
help.
Unlock error
VC01
VC01 is unlocked. Contact your Codan agent for
help.
Unlock error
VC01&2
VC01 and VC02 are
unlocked.
Contact your Codan agent for
help.

Codan 9390 Specifications

General

Brand	Codan
Model	9390
Category	Transceiver
Language	English