Compaq ProLiant ML570 User Manual

3-28 Compaq ProLiant ML570 Maintenance and Service Guide
1100 – 1199, Serial Test Error Codes
The 1100 series of diagnostic error codes identifies failures with serial/parallel interface board
or system board functions. Corrective action may require replacement of the serial/parallel
interface board or the system board assembly.
Table 3-9
Serial Test Error Codes
Error Code Description Recommended Action
1101-XX Serial port test failed.
1109-XX Clock register test failed.
1. Check the switch settings on the serial/parallel
interface board (if applicable) and retest.
2. Replace the serial/parallel interface board
(if applicable) and retest.
3. Replace the system board and retest.
1200 – 1299, Modem Communications Test Error Codes
The 1200 series of diagnostic error codes identifies failures with the modem. Corrective action
may require replacement of the modem.
Table 3-10
Modem Communications Test Error Codes
Error Code Description Recommended Action
1201-XX Modem internal loopback test
failed.
1202-XX Modem timeout test failed.
1203-XX Modem external termination test
failed.
1204-XX Modem auto originate test failed.
1206-XX Dial multifrequency tone test
failed.
1210-XX Modem direct connect test failed.
1. Refer to the modem documentation for correct
setup procedures and retest.
2. Check the modem line and retest.
3. Replace the modem and retest.

Compaq ProLiant ML570 Specifications

General

Brand	Compaq
Model	ProLiant ML570
Category	Server
Language	English