Compaq ProLiant ML570 User Manual

2-8 Compaq ProLiant ML570 Maintenance and Service Guide
Locking Casters
To remove the locking casters:
1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2. Place the server on its side, then remove the three T-25 screws securing each caster to
the chassis.
3. Pull the locking casters away from the server.
Figure 2-1. Removing the locking casters
Reverse steps 1 through 3 to replace the locking casters.

Compaq ProLiant ML570 Specifications

General

Brand	Compaq
Model	ProLiant ML570
Category	Server
Language	English