3-68 Compaq ProLiant ML570 Maintenance and Service Guide
Server Health Logs
In some servers, Server Health Logs are replaced by the IML, if it is supported. Server Health
Logs contain information to help identify and correct any server failures and correlate hardware
changes with server failure. Server Health Logs are stored in nonvolatile RAM and consist of
the Critical Error Log and the Revision History Table.
If errors occur, information about the errors is automatically stored in the Critical Error Log.
Whenever boards or components (that support revision tracking) are updated to a new revision,
the Revision History Table is updated.
ASR-2 IML Messages
The IML, or Critical Error Log for Server Health Log, records memory errors, catastrophic
hardware errors, and software errors that causes system failures. This information helps to
quickly identify and correct the problem, thus minimizing downtime.
You can view the IML or Critical Error Log, through Compaq Insight Manager. The
Diagnostics Utility either resolves the error or suggests corrective action in systems that do not
support event logs.
The IML or Critical Error Log, identifies and records all the errors identified in Table 3-23.
Table 3-23
ASR-2 IML or Critical Error Log Messages
Message Description
Abnormal Program Termination The operating system encountered an abnormal situation that caused a
system failure.
ASR-2 detected by ROM An ASR-2 activity was detected and logged by the system ROM.
ASR-2 Test Event The System Configuration Utility generated a test alert.
Automatic Server Recovery
Base Memory Parity Error
The system detected a data error in base memory following a reset due to
the ASR-2 timer expiration.
Automatic Server Recovery
Extended Memory Parity Error
The system detected a data error in extended memory following a reset
due to the ASR-2 timer expiration.
Automatic Server Recovery
Memory Parity Error
The system ROM was unable to allocate enough memory to create a stack.
Then, it was unable to put a message on the screen or continue starting
the server.
Automatic Server Recovery
Reset Limit Reached
The maximum number of system resets due to ASR-2 timer expiration was
reached, resulting in the loading of Compaq Utilities.
continued