Compaq ProLiant ML570 - Index

Index
A
AC power connectors, location 4-2
accelerator board not detected 3-34
accelerator error log 3-34
accelerator parity
read errors 3-34
write errors 3-34
accelerator status
cache was automatically
configured 3-34
data in the cache was lost due to
some reason other than the
battery being
discharged 3-34
dirty data detected has reached
limit 3-34
dirty data detected, unable to
write 3-35
excessive ECC errors
detected 3-35
obsolete data
detected 3-35
discarded 3-35
flushed 3-35
permanently disabled 3-35
possible data loss in cache 3-35
temporarily disabled 3-35
unrecognized status 3-36
valid data found at reset 3-36
warranty alert 3-36
access panel
rack, part number 1-3
removing 2-10
removing, illustrated 2-10
replacing 2-10
tower, part number 1-3
ACU
accessing 3-5, 3-6
accessing from System
Configuration 3-6
executing 3-6
adapter/NVRAM ID mismatch 3-36
ADU
description 3-3, 3-33
executing 3-6
starting 3-33
ADU error messages 3-34, 3-52
accelerator board 3-34
accelerator error 3-52
adapter error 3-36
array accelerator 3-34, 3-35,
3-36
board error 3-36
cabling errors 3-48
controller 3-37
controller drive detections 3-50
drive problems 3-38, 3-50
hard drives 3-37, 3-38, 3-43,
3-44
NVRAM configuration 3-41
soft firmware upgrade
required 3-44
warnings 3-51
array accelerator
ADU error messages 3-35
capacity 3-42
array accelerator battery pack X
below reference voltage
(recharging) 3-36
not fully charged 3-36
Array Configuration Utility See
ACU
Array Diagnostic Utility See ADU
ART, assembly version 3-70