Index 5
running 3-22
starting from CD 3-4
starting remotely 3-66
test error codes
CD-ROM drive 3-31
diskette drive 3-27
graphics display unit 3-26
hard drive 3-29, 3-31
keyboard 3-25
memory 3-24
modem 3-28
NIC 3-30
pointing device
interface 3-32
processor 3-23
SCSI hard drive 3-31
SCSI tape drive 3-32
SCSI/IDE CD-ROM
drive 3-31
serial port 3-28
tape drive 3-30, 3-32
Test Error Codes Tables,
description 3-22
when to run 3-7
Diagnostics and Utilities menu
Diagnose Drive Array 3-22
Inspect Computer 3-22
Remote Utilities 3-22
Test Computer 3-22
Upgrade Firmware 3-22
Dial-In status, setting 3-65
Dial-Out
status, setting 3-65
string, setting 3-65
DIMMs See also memory
installation guidelines 2-36
maximum supported 2-36
part number 1-7
removing 2-39
removing, illustrated 2-39
replacing 2-36, 2-39
socket locations, illustrated 2-36
disable command issued 3-37
disaster recovery, ROMPaq 3-73
diskette drive
connectors, identified 4-3
LED indicator, illustrated 4-19
location 2-20
part number 1-5
removing 2-29
removing, illustrated 2-29
replacing 2-29
specifications 5-4
test error codes 3-27
diskette, creating Diagnostics 3-22
door, front bezel
part number 1-3
removing 2-9
removing, illustrated 2-9
replacing 2-9
drive (bay) X
failed 3-38
firmware needs upgrading 3-37
inadvertently replaced 3-38
insufficient capacity for its
configuration 3-37
invalid M&P stamp 3-37
loose cable 3-37
non-Compaq supplied 3-39
replacement drive 3-37
replacement drive marked
OK 3-38
replacing 3-38
undergoing drive recovery 3-38
upload code not readable 3-38
Drive Array Advanced
Diagnostics See DAAD
drive bay locations, illustrated 2-20
drive cage
part number 1-3
removing 2-24
removing, illustrated 2-25
replacing 2-25
drive cannot support redundant
controller operation 3-41
drive communication ADU error
messages 3-50
drive fan cable and cable bracket
removing 2-18
removing, illustrated 2-18
replacing 2-18
drive monitoring
features are unobtainable 3-38
NOT enabled for SCSI Port X
Drive ID X 3-38
drive time-out occurred on physical
drive bay X 3-38
drive X indicates position Y 3-38
drivers, installing 3-3
duplicate write memory error 3-39
E
electric shock symbol 2-3
electronics drawer
cable locations, illustrated 2-35
removing 2-34
removing, illustrated 2-34
replacing 2-35
To Next Page
Loading...
