16 Compaq ProLiant ML570 Server Maintenance and Service Guide
Hot-Plug Power Supply
Diagnostic LED
Indicators 4-18
Hot-Plug Power Supply
Specifications 5-3
Hot-Plug SCSI Hard Drive
LED Indicators 4-20
Integrated Dual-Channel Wide
Ultra2 SCSI Controller
Specifications 5-7
Internal Diagnostics Display
(IDD) Indicator Codes 4-14
Keyboard Test Error
Codes 3-25
Memory Test Error Codes 3-24
Modem Communications Test
Error Codes 3-28
NC3123 Fast Ethernet NIC PCI
10/100 Wake on LAN
(WOL) Specifications 5-6
Operating System Restart SCU
Setting for ASR-2 3-67
Parallel Printer Test Error
Codes 3-25
PCI Hot Plug LED
Indicators 4-16
Peripheral Board Configuration
(Maintenance) Switchbank
(SW1) Settings 4-6
Peripheral Board
Connectors 4-4
Pointing Device Interface Test
Error Codes 3-32
POST Error Messages 3-8
Power Backplane Board
Connectors 4-5
Power Supply Bay
Configuration 2-51
Primary Processor Test Error
Codes 3-23
Processor Configuration Switch
(SW4) 100-MHz Bus
Speed 4-8
Processor Locations 2-47
Rear Panel Connectors 4-2
Removable Media Area and
Mass Storage Device
Descriptions 2-20
Revision History Table 3-70
RJ-45 Network Connector Status
LED Indicators 4-17
SCSI Hard Drive Test Error
Codes 3-31
SCSI Tape Drive Test Error
Codes 3-32
SCSI/IDE CD-ROM Test Error
Codes 3-31
SDRAM DIMM Socket
Locations 2-36
Serial Test Error Codes 3-28
Smart Array 4200 Controller
Specifications 5-9
System Board Connectors 4-3
System Board Expansion
Slots 2-42
System Board ID/Miscellaneous
Switches (SW6) 4-9
System Board Interlock LED
Indicators 4-13
System Board Power Cables
Routing 2-30
System Components Spare Parts
List 1-5
System Unit Specifications 5-2
Tape Drive Test Error
Codes 3-30
tape drives, test error codes 3-30,
3-32
technical support ix
telephone numbers ix
telephone symbol 2-3
terminator board
part number 1-7
removing 2-49
removing, illustrated 2-49
replacing 2-49
test error codes
CD-ROM drive 3-31
diskette drive 3-27
hard drive 3-29, 3-31
keyboard 3-25
memory 3-24
modem 3-28
NIC board 3-30
parallel printer 3-25
pointing device interface 3-32
processor 3-23
SCSI hard drive 3-31
SCSI tape drive 3-32
SCSI/IDE CD-ROM drive 3-31
serial port 3-28
tape drive 3-30, 3-32
video display unit 3-26
thermal shutdown 3-61
tools, recommended for
servicing 2-1
tower-to-rack conversion kit, part
number 1-8
troubleshooting
drive communications 3-50
hard drives 3-50
To Next Page
Loading...
