EasyManua.ls Logo

Compaq ProLiant ML570 - Page 98

Compaq ProLiant ML570
199 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diagnostics and Troubleshooting 3-21
Table 3-2
POST Error Messages
continued
Error Code Audible Beeps Probable Source of Problem Recommended Action
1799-Drive Array –
Drive(s) Disabled due
to Array Accelerator
Data Loss.
Select “F1” to
continue with logical
drives disabled.
Select “F2” to accept
data loss and to
re-enable logical
drives.
None Volume failed due to loss of data
in posted-writes memory.
Press F1 to continue with
logical drives disabled or F2 to
accept data loss and re-enable
logical drive.
Beeps only 2 long No valid memory is present in
the system.
Replace failed memory with
valid memory.
Beeps only 2 long, 2 short Power is cycled. Temperature too
hot. Processor fan not installed
or spinning.
Check fans.
(Run System
Configuration Utility –
F10 key)
None A configuration error occurred
during POST.
Press F10 to run System
Configuration Utility.
(RESUME – F1 key) None An indication to continue with the
operation
Press F1.

Table of Contents

Compaq ProLiant ML570 - Page 98