• SSLVPNInterface, page 301
• SSLVPNInterfaceSettings, page 302
• StatelessPolicy, page 303
• StateSettings, page 304
• TCPSettings, page 305
• ThresholdRule, page 307
• UpdateCenter, page 309
• UserAuthRule, page 310
• VLAN, page 313
• VLANSettings, page 315
• VoIPProfile, page 316
• WebProfile, page 318
• ZoneDefenseBlock, page 320
• ZoneDefenseExcludeList, page 321
• ZoneDefenseSwitch, page 322
• ZoneDefenseSwitchSettings, page 323
3.1. Access
Description
Use an access rule to allow or block specific source IP addresses on a specific interface.
Properties
Index The index of the object, starting at 1. (Identifier)
Name Specifies a symbolic name for the object.
Action Accept, Expect or Drop. (Default: Drop)
Interface The interface the packet must arrive on for this rule
to be carried out. Exception: the Expect rule.
Network The IP span that the sender must belong to for this
rule to be carried out.
LogEnabled Enable logging. (Default: Yes)
LogSeverity Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
109
To Next Page
Loading...
