3.83. LogReceiverSyslog
Description
A Syslog receiver is used to receive log events from the system in the standard Syslog format.
Properties
Name Specifies a symbolic name for the log receiver.
(Identifier)
IPAddress Specifies the IP address of the log receiver.
Port Specifies the port number of the log service.
(Default: 514)
Facility Specifies what facility is used when logging.
(Default: local0)
Hostname Specifies a unique hostname. If not configured, the
IP address of the sending interface will be sent as
hostname. (Optional)
RFC5424 Send Syslog messages according to RFC5424.
(Default: No)
LogSeverity Specifies with what severity log events will be sent
to the specified log receivers. (Optional; Default:
Emergency,Alert,Critical,Error,Warning,Notice,Info)
RoutingTable Specifies the routing table the clients host route
should be added to. (Default: main)
Comments Text describing the current object. (Optional)
3.83.1. LogReceiverMessageException
The definitions here are the same as in Section 3.40.1, “LogReceiverMessageException” .
Chapter 3: Configuration Reference
247
To Next Page
Loading...
