D-Link DFL-870

3.65. IPsecAlgorithms
Description
Configure algorithms which are used in the IPsec phase of an IPsec session.
Properties
Name Specifies a symbolic name for the object.
(Identifier)
NULLEnabled Enable plaintext. (Default: No)
DESEnabled Enable DES encryption algorithm. (Default: No)
DES3Enabled Enable 3DES encryption algorithm. (Default: No)
AESEnabled Enable AES encryption algorithm. (Default: No)
BlowfishEnabled Enable Blowfish encryption algorithm. (Default:
No)
TwofishEnabled Enable Twofish encryption algorithm. (Default: No)
CAST128Enabled Enable CAST128 encryption algorithm. (Default:
No)
BlowfishMinKeySize Specifies the minimum Blowfish key size in bits.
(Default: 128)
BlowfishKeySize Specifies the Blowfish preferred key size in bits.
(Default: 128)
BlowfishMaxKeySize Specifies the maximum Blowfish key size in bits.
(Default: 448)
TwofishMinKeySize Specifies the minimum Twofish key size in bits.
(Default: 128)
TwofishKeySize Specifies the Twofish preferred key size in bits.
(Default: 128)
TwofishMaxKeySize Specifies the maximum Twofish key size in bits.
(Default: 256)
AESMinKeySize Specifies the minimum AES key size in bits.
(Default: 128)
AESKeySize Specifies the preferred AES key size in bits.
(Default: 128)
AESMaxKeySize Specifies the maximum AES key size in bits.
(Default: 256)
MD5Enabled Enable MD5 integrity algorithm. (Default: No)
SHA1Enabled Enable SHA1 integrity algorithm. (Default: No)
SHA256Enabled Enable SHA256 integrity algorithm. (Default: No)
Chapter 3: Configuration Reference
217