EasyManua.ls Logo

D-Link DFL-870

D-Link DFL-870
328 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.86. MiscSettings
Description
Miscellaneous Settings
Properties
UDPSrcPort0 How to treat UDP packets with source port 0.
(Default: DropLog)
Port0 How to treat TCP/UDP packets with destination
port 0 and TCP packets with source port 0. (Default:
DropLog)
HighBuffers_Dynamic Allocate the HighBuffers value dynamically.
(Default: Yes)
HighBuffers Number of packet buffers to allocate in addition to
the ~200 initial buffers. (Default: 1024)
LocalUndelivered How to treat (allowed) packets to the firewall that
do not match open ports (snmp, scp, netcon, etc).
(Default: DropLog)
WCFPerfLog Enables periodical logging of Web Contentent
Filtering resolving performance. (Default: Disabled)
AllowIPRules Allow using IPRules in addition to IPPolicies.
(Default: Yes)
EnablePollOffload Enable interface poll offloading. (Default: Yes)
AppCtl_FreeMemOptLevel Percentage level of free memory when the
Application Control subsystem will optimize its
memory usage and free up memory (0=disabled).
(Default: 5)
AVCache_Lifetime Number of minutes that an anti-virus cache entry
remains in the cache (0=cache disabled). (Default:
20)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3: Configuration Reference
250

Table of Contents

Other manuals for D-Link DFL-870

Related product manuals