D-Link DFL-870

| OTHER | TCPUDP | ALL}] [-port=<port number>]
[-dest=<ip address>] [-time=<seconds>]
Block specified netobject.
blacklist -unblock <host> [-serv=<service>] [-prot={TCP | UDP |
ICMP | OTHER | TCPUDP | ALL}] [-port=<port number>]
[-dest=<ip address>] [-time=<seconds>] [-force]
Unblock specified netobject.
Options
-all Show all the information.
-black Show blacklist hosts only.
-block Block specified netobject. (Admin only)
-creationtime Show creation time.
-dest=<ip address> Destination address to block/unblock
(ExceptExtablished flag is set on).
-dynamic Show dynamic hosts only.
-force Unblock all services for the host that matches to
options.
-info Show detailed information.
-listtime Show time in list (for dynamic hosts).
-num={ALL | <Integer>} Maximum number of entries to show (default: 20).
-port=<port number> Number of the port to block/unblock.
-prot={TCP | UDP | ICMP | OTHER |
TCPUDP | ALL}
Protocol to block/unblock.
-serv=<service> Service to block/unblock.
-show Show information about the blacklisted hosts.
-time=<seconds> The time that the host will remain blocked.
-unblock Unblock specified netobject. (Admin only)
-white Show whitelist hosts only.
<host> IP address range.
2.2.11. buffers
List packet buffers or the contents of a buffer.
Description
Lists the 20 most recently freed packet buffers, or in-depth information about a specific buffer.
Chapter 2: Command Reference
39