-connection Show SIP connections.
-definition Show running ALG configuration parameters.
-flags=<String> SIP snooping for certain levels. Expected number in
hexadecimal notation.
-registration[={SHOW | FLUSH}] Show or flush registration table. (Default: show)
-session Show active SIP sessions.
-snoop={ON | OFF | VERBOSE} Enable or disable SIP snooping. NOTE: 'verbose'
option outputs a lot of information on the console
which may lead to system instability. Use with
caution. (Admin only)
-statistics[={SHOW | FLUSH}] Show or flush SIP counters. (Default: show)
<alg> SIP-ALG name.
<alg> SIP-ALG name.
<ipaddr> IP Address to snoop.
2.2.80. smtp
List SMTP LogReceiver sessions and send test mail.
Description
List SMTP sessions for configured SMTP LogReceivers and CLI SMTP sessions created when using
"sendmail" to send test mail to SMTP LogReceiver. The temporary CLI sessions, marked with (CLI),
has a lifetime of 300s.
Usage
smtp -list [-num[=<1...1000>]] [-verbose]
Show SMTP sessions.
smtp -verbose
Show SMTP sessions with verbose output.
smtp -stat
Show SMTP statistics.
smtp -sendmail -logreceiver=<Mail Alerting> [-message=<String>]
Send mail to specified SMTP LogReceiver.
Options
-list Show SMTP sessions.
Chapter 2: Command Reference
86
To Next Page
Loading...
