3.78. LinkMonitor
Description
The Link Monitor allows the system to monitor one or more hosts and take action if they are
unreachable.
Properties
Action Specifies what action the system should take.
Addresses Specifies the addresses that should be monitored.
MaxLoss A single host is considered unreachable if this
number of consecutive ping responses to that host
are not replied to. (Default: 7)
PingInterval Milliseconds between each monitor attempt.
(Default: 250)
InitGracePeriod Do not allow triggering of the link monitor for this
number of seconds after the last reconfiguration.
(Default: 45)
RoutingTable Routing table used for link monitoring. (Default:
main)
UseSharedIP Use the shared IP of an HA cluster instead of the
private IP of the node. (Default: No)
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
241
To Next Page
Loading...
