3.103. RemoteMgmtSNMP
Description
Configure SNMP management to enable SNMP polling.
Properties
Name Specifies a symbolic name for the object.
(Identifier)
Interface Specifies the interface for which remote access is
granted.
SnmpVersion Enabled SNMP version. (Default:
SNMPv1_SNMPv2c)
Snmp3SecurityLevel Enabled SNMPv3 security level. (Default:
noAuthNoPriv)
SNMPGetCommunity Specifies the name of the community to be
granted rights to remotely monitor the firewall.
LocalUserDatabase Specifies the local user database to use for
authentication.
Network Specifies the network for which remote access is
granted.
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
276
To Next Page
Loading...
