-srcif=<Interface> Interface used to reach the remote endpoint.
-stat Show verbose information.
-tunnel=<IPsecTunnel> IPsec interface.
-tunnels Show information on configured tunnels.
-verbose Show verbose information.
<ip address> IP address of remote SG/peer.
<IPsecTunnel> IPsec interface.
2.2.40. ikesnoop
Enable or disable IKE-snooping.
Description
Turn IKE on-screen snooping on/off. Useful for troubleshooting IPsec connections.
Usage
ikesnoop
Show IKE snooping status.
ikesnoop -on [<ip address>] [-verbose]
Enable IKE snooping.
ikesnoop -off
Disable IKE snooping.
Options
-off Turn IKE snooping off.
-on Turn IKE snooping on.
-verbose Enable IKE snooping with verbose output.
<ip address> IP address to snoop.
Deprecated
(2014-05-27) Replaced by command ike -snoop. Deprecated commands may be
removed in future releases.
2.2.41. ippool
Chapter 2: Command Reference
57
To Next Page
Loading...
