Members Group members.
UserAuthGroups Groups and user names that belong to this object.
Objects that filter on credentials can only be used
as source networks and destinations networks in
rules. (Optional)
NoDefinedCredentials If this property is enabled the object requires user
authentication, but has no credentials (user names
or groups) defined. This means that the object only
requires that a user is authenticated, but ignores
any kind of group membership. (Default: No)
Comments Text describing the current object. (Optional)
3.2.1.9. IP4HAAddress
Description
Use an IP4 HA Address item to define a name for a specific IP4 host for each node in a high
availability cluster.
Properties
Name Specifies a symbolic name for the network object.
(Identifier)
Address An IP address with one instance for each node in
the high availability cluster.
UserAuthGroups Groups and user names that belong to this object.
Objects that filter on credentials can only be used
as source networks and destinations networks in
rules. (Optional)
NoDefinedCredentials If this property is enabled the object requires user
authentication, but has no credentials (user names
or groups) defined. This means that the object only
requires that a user is authenticated, but ignores
any kind of group membership. (Default: No)
Comments Text describing the current object. (Optional)
3.2.2. EthernetAddress
The definitions here are the same as in Section 3.2.1.3, “EthernetAddress” .
3.2.3. EthernetAddressGroup
The definitions here are the same as in Section 3.2.1.4, “EthernetAddressGroup” .
3.2.4. IP4Address
The definitions here are the same as in Section 3.2.1.7, “IP4Address” .
Chapter 3: Configuration Reference
114
To Next Page
Loading...
