3.88. MulticastSettings
Description
Advanced Multicast Settings.
Properties
AutoAddMulticastCoreRoute Auto generate core route for
"224.0.0.1-239.255.255.255". (Default: Yes)
IGMPBeforeRules Allows IGMP traffic to enter the firewall by default.
(Default: Yes)
IGMPMaxGlobalRequestsPerSecond Maximum number of requests per second.
(Default: 1000)
IGMPMaxRequestsPerSecond Maximum number of requests per interface per
second. (Default: 100)
IGMPReactToOwnQueries The firewall should always respond with Member
Reports, even to Queries originating from itself.
(Default: No)
IGMPRobustnessVariable IGMP is robust to 'value' - 1 packet losses. (Default:
2)
IGMPQueryInterval The interval (ms) between general queries sent by
the firewall. (Default: 125000)
IGMPQueryResponseInterval The maximum time (ms) until a host/client has to
send an answer to a query. (Default: 10000)
IGMPStartupQueryInterval The general query interval (ms) to use during the
startup phase (default: 1/4 of the 'IGMP Query
Interval' parameter. (Default: 30000)
IGMPStartupQueryCount The number of startup queries to send during the
startup phase. (Default: 2)
IGMPLastMemberQueryInterval The maximum time (ms) until a host/client has to
send an answer to a group and group-and-source
specific query. (Default: 5000)
IGMPUnsolicatedReportInterval The time between repetitions (ms) of an initial
membership report. (Default: 1000)
IGMPRouterVersion Multiple IGMP querying routers on a network must
use the same IGMP version. (Default: IGMPv3)
IGMPLowestCompatibleVersion Lowest IGMP compatibility mode. (Default:
IGMPv1)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3: Configuration Reference
252
To Next Page
Loading...
