3.132. ZoneDefenseBlock
Description
Manually configured blocks are used to block a host/network on the switches either by default or
based on schedule.
Properties
Addresses Specifies the addresses to block.
Protocol All, TCP, UDP or ICMP. (Default: All)
Port Specifies which UDP or TCP port to use. (Default: 0)
Schedule Specifies the schedule when the given addresses
should be blocked. (Optional)
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
320
To Next Page
Loading...
