D-Link DFL-870

Show content of the DHCP server ruleset.
Description
Show the content of the DHCP server ruleset and various information about active/inactive
leases.
Display filter filters entries based on Interface/MAC/IP (example: If1 192.168.*)
Usage
dhcpserver
Show DHCP server leases.
dhcpserver -show [-rules] [-leases] [-num=<Integer>]
[-fromentry=<Integer>] [-mappings] [-utilization]
[<Display filter>]...
Show DHCP server ruleset.
dhcpserver -release={BLACKLIST}
Release a specific types of IPs.
dhcpserver -releaseip <Interface> <IP address>
Release an active IP.
Options
-fromentry=<Integer> Show entry list from offset <n>.
-leases Show DHCP server leases.
-mappings Show DHCP server IP mappings.
-num=<Integer> Limit list to <n> entries.
-release={BLACKLIST} Release specific type of IPs. (Admin only)
-releaseip Release an active IP. (Admin only)
-rules Show DHCP server rules.
-show Show ruleset.
-utilization Show IP pool utilization.
<Display filter> Display filter based on Interface/MAC/IP (eg. If1
192.168.*).
<Interface> Interface.
<IP address> IP address.
2.2.24. dhcpv6
Chapter 2: Command Reference
46