3.100. RemoteMgmtHTTP
Description
Configure HTTP/HTTPS management to enable remote management to the system.
Properties
Name Specifies a symbolic name for the object.
(Identifier)
Interface Specifies the interface for which remote access is
granted.
HTTP Enable remote management via HTTP. (Default:
No)
HTTPS Enable remote management via HTTPS. (Default:
No)
AuthSource Optionally enable authentication from an external
source. Note that a Local User Database must
ALWAYS be configured to prevent administrative
lockout in cases where the external source may not
be available. (Default: LocalOnly)
AuthOrder Specifies if the local database should be queried
before or after the external database. (Default:
LocalLast)
LocalUserDatabase Specifies the local user database to use for login.
AccessLevel Optionally restrict the access level of users
authenticated by the local database. (Default:
Admin)
RadiusServers Specifies the authentication servers that will be
used to authenticate users matching this rule.
RadiusMethod Specifies the authentication method used for
encrypting the user password. (Default: PAP)
ChallengeExpire How long, in seconds, before RADIUS challenge
expires. (Default: 160)
PrimaryRetryInterval How many seconds to wait before trying to use the
primary server again if it has failed. (Default: 0)
AdminGroups Restricts administration access to specific user
groups. (Optional)
AuditGroups Restricts auditing access to specific user groups.
(Optional)
Network Specifies the network for which remote access is
granted.
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
272
To Next Page
Loading...
