3.18. DateTime
Description
Set the date, time and time zone information for this system.
Properties
TimeZone Specifies the time zone. (Default: GMT)
Location Specifies the location to use its time zone.
(Optional)
DSTEnabled Enable daylight saving time. (Default: Yes)
DSTOffset Daylight saving time offset in minutes. (Default: 60)
DSTMode Select DST Mode. (Default: Manual)
DSTStartMonth What month daylight saving time starts. (Default:
March)
DSTStartDay What day of month daylight saving time starts.
(Default: 1)
DSTEndMonth What month daylight saving time ends. (Default:
October)
DSTEndDay What day of month daylight saving time ends.
(Default: 1)
TimeSynchronization Enable time synchronization. (Default: Disable)
TimeSyncServerType Type of server for time synchronization, UDPTime
or SNTP (Simple Network Time Protocol). (Default:
SNTP)
TimeSyncServer1 DNS hostname or IP Address of Timeserver 1.
TimeSyncServer2 DNS hostname or IP Address of Timeserver 2.
(Optional)
TimeSyncServer3 DNS hostname or IP Address of Timeserver 3.
(Optional)
TimeSyncInterval Seconds between each resynchronization. (Default:
86400)
TimeSyncMaxAdjust Maximum time drift in seconds that a server is
allowed to adjust. (Default: 600)
TimeSyncGroupIntervalSize Interval according to which server responses will
be grouped. (Default: 10)
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
142
To Next Page
Loading...
