3.15. ConfigModePool
Description
An IKE Config Mode Pool will dynamically assign the IP address, DNS server, WINS server etc. to
the VPN client connecting to this gateway.
Properties
IPPoolType Specifies whether a predefined IP Pool or a static
set of IP addresses should be used as IP address
source.
IPPool Specifies the IP pool to use for assigning IP
addresses to VPN clients.
IPPoolAddress Specifies the set of IP addresses to use for
assigning IP addresses to VPN clients.
IPPoolNetmask Specifies the netmask to assign to VPN clients.
DNS Specifies the IP address of a DNS server that a VPN
client should be able to connect to. (Optional)
NBNSIP Specifies the IP address of a NBNS/WINS server that
a VPN client should be able to connect to.
(Optional)
DHCP Specifies the IP address of a DHCP that that a VPN
client should be able to connect to. (Optional)
Subnets Specifies additional subnets behind this gateway.
(Optional)
Comments Text describing the current object. (Optional)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3: Configuration Reference
139
To Next Page
Loading...
