3.40. EventReceiverSNMP2c
Description
A SNMP2c event receiver is used to receive SNMP events from the system.
Properties
Name Specifies a symbolic name for the log receiver.
(Identifier)
IPAddress Destination IP address.
Port Destination port. (Default: 162)
Community Community string. (Default: public)
RepeatCount Repetition counter. (Default: 0)
SNMP2cIfTraps This enables generation of SNMPv2c traps for
interface up/down events. (Default: No)
LogSeverity Specifies with what severity log events will be sent
to the specified log receivers. (Optional; Default:
Emergency,Alert,Critical,Error,Warning,Notice,Info)
RoutingTable Specifies the routing table the clients host route
should be added to. (Default: main)
Comments Text describing the current object. (Optional)
3.40.1. LogReceiverMessageException
Description
A log message exception is used to override the severity filter in the log receiver.
Properties
LogCategory The Category of the log message.
LogID The ID number of the log message, a empty value
selects all messages of this category. (Optional)
LogType EXCLUDE or INCLUDE. (Default: EXCLUDE)
LogSeverity Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
176
To Next Page
Loading...
