3.125. ThresholdRule
Description
A Threshold Rule defines a filter for matching specific network traffic. When the filter criterion is
met, the Threshold Rule Actions are evaluated and possible actions taken.
Properties
Index The index of the object, starting at 1. (Identifier)
Name Specifies a symbolic name for the rule. (Optional)
SourceInterface Specifies the name of the receiving interface to be
compared to the received packet.
SourceNetwork Specifies the sender span of IP addresses to be
compared to the received packet.
DestinationInterface Specifies the destination interface to be compared
to the received packet.
DestinationNetwork Specifies the span of IP addresses to be compared
to the destination IP of the received packet.
Service Specifies a service that will be used as a filter
parameter when matching traffic with this rule.
Schedule By adding a schedule to a rule, the firewall will only
allow that rule to trigger at those designated times.
(Optional)
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
3.125.1. ThresholdAction
Description
A Threshold Rule Action specifies what thresholds to measure, and what action to take if those
thresholds are reached.
Properties
Action Protect or Audit. (Default: Protect)
GroupBy Specifies whether the threshold should be host- or
network-based. (Default: SourceIP)
Threshold Specifies the threshold.
Chapter 3: Configuration Reference
307
To Next Page
Loading...
