3.114. ServiceICMPv6
Description
An IPv6-ICMP Service is an object definition representing IPv6-ICMP traffic with specific
parameters.
Properties
Name Specifies a symbolic name for the service.
(Identifier)
MessageTypes Specifies the IPv6-ICMP message types that are
applicable to this service. (Default: All)
EchoRequest Enable matching of Echo Request messages.
(Default: No)
EchoRequestCodes Specifies which Echo Request message codes
should be matched. (Default: 0-255)
EchoReply Enable matching of Echo Reply messages. (Default:
No)
EchoReplyCodes Specifies which Echo Reply message codes should
be matched. (Default: 0-255)
DestinationUnreachable Enable matching of Destination Unreachable
messages. (Default: No)
DestinationUnreachableCodes Specifies which Destination Unreachable message
codes should be matched. (Default: 0-255)
PacketTooBig Enable matching of Packet Too Big messages.
(Default: No)
PacketTooBigCodes Specifies which Packet Too Big message codes
should be matched. (Default: 0-255)
TimeExceeded Enable matching of Time Exceeded messages.
(Default: No)
TimeExceededCodes Specifies which Time Exceeded message codes
should be matched. (Default: 0-255)
ParameterProblem Enable matching of Parameter Problem messages.
(Default: No)
ParameterProblemCodes Specifies which Parameter Problem message codes
should be matched. (Default: 0-255)
ForwardICMPErrors Allow ICMP errors for active connections to be
forwarded through the system. (Default: No)
EnableIPv4PathMTUDiscovery Path MTU Discovery allows communicating
endpoints to negotiate optimal packet sizes. This
prevents fragmentation by network equipment
between the endpoints. Path MTU Discovery relies
on ICMP message forwarding so ICMP forwarding
Chapter 3: Configuration Reference
293
To Next Page
Loading...
