3.56. IGMPSetting
Description
IGMP parameters can be tuned for one, or a group of interfaces in order to match the
characteristics of a network.
Properties
Name Specifies a symbolic name for the object.
(Identifier)
Interface The interfaces that these settings should apply to.
RobustnessVariable IGMP is robust to (Robustness Variable - 1) packet
losses. (Default: 2)
MaxRequestsPerSecond Maximum number of IGMP requests to process
each second and interface. (Default: 100)
RouterVersion Multiple IGMP querying routers on a network must
use the same IGMP version. (Default: IGMPv3)
LowestCompatibleVersion The lowest IGMP version to allow on incoming
requests. (Default: IGMPv1)
QueryInterval The interval between general queries sent by the
firewall. (Default: 125000)
QueryResponseInterval The maximum time until a host (client) has to send
an answer to a query. (Default: 10000)
LastMemberQueryInterval The maximum time until a host (client) has to send
an answer to a group and group-and-source
specific query. (Default: 10000)
LastMemberQueryCount The number of group and group-and-source
specific queries sent until the firewall decides there
are no more subscribers to a specific multicast
group. (Default: 2)
StartupQueryInterval The general query interval to use during the
startup phase. (Default: 30000)
StartupQueryCount The number of startup queries to send during the
startup phase. (Default: 2)
UnsolicatedReportInterval The time between repetitions of a host's initial
membership reports to a group. (Default: 1000)
ReactToOwnQueries Should the system respond to Member Report
Queries orginating from itself. (Default: No)
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
195
To Next Page
Loading...
