3.85. LoopbackInterface
Description
Loopback interfaces will take all packets sent through them and pass them back up a different
interface as newly received packets.
Properties
Name Specifies a symbolic name for the interface.
(Identifier)
LoopTo Loopback interface. (Optional)
IP Interface address.
Network The network of the interface.
Broadcast The broadcast address of the connected network.
(Optional)
Metric Specifies the metric for the auto-created route.
(Default: 100)
AutoInterfaceNetworkRoute Automatically add a route for this virtual LAN
interface using the given network. (Default: Yes)
EnableIPv6 Enable processing of IPv6 traffic on this interface.
(Default: No)
IPv6IP IPv6 Interface address.
IPv6Network The network of the interface.
SNMPIndex Interface index assigned by the system when
persistent interface indexes are enabled. (Default:
0)
MemberOfRoutingTable All or Specific. (Default: All)
RoutingTable Specifies the PBR table to insert the interface IP
route into. It also means that the specified routing
table will be used for all routing lookups, unless
overridden by a PBR rule. (Default: main)
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
249
To Next Page
Loading...
