3.63. IPRuleFolder
Description
An IP Rule Folder can be used to group IP Rules into logical groups for better overview and
simplified management.
Properties
Index The index of the object, starting at 1. (Identifier)
Name Specifies the name of the folder.
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
3.63.1. IPPolicy
The definitions here are the same as in Section 3.60, “IPPolicy” .
3.63.2. SLBPolicy
Description
Server Load Balancing using Static Address Translation. Allows distribution of client requests
over a number of servers.
Properties
Index The index of the object, starting at 1. (Identifier)
Name Specifies a symbolic name for the policy.
SLBAddresses The IP addresses of the servers in the server farm.
SLBStickiness Specifies stickiness mode. (Default: None)
SLBIdleTimeOut New connections that arrive within the idle
timeout are assigned to the same real server as
previous connections from that address. The
timeout is refreshed after each new connection.
(Default: 30)
SLBMaxSlots Specifies maximum number of slots for IP and
network stickiness. (Default: 2048)
SLBNetSize Specifies network size for network stickiness.
(Default: 24)
Chapter 3: Configuration Reference
208
To Next Page
Loading...
