attempts. (Default: 800)
SLBHTTPURLType Defines how the request URL should be
interpreted. (Default: FQDN)
SLBHTTPRequestURL Specifies the HTTP URL to monitor.
SLBHTTPExpectedResponse Expected HTTP response. (Optional)
SLBDistribution Specifies the algorithm used for the load
distribution tasks. (Default: RoundRobin)
SLBWindowTime Specifies the window time used for counting the
number of seconds back in time to summarize the
number of new connections for connection-rate
algorithm. (Default: 10)
RequireIGMP Multicast traffic must have been requested using
IGMP before it is forwarded. (Default: Yes)
MultiplexArgument Specifies how the traffic should be forwarded and
translated.
MultiplexAllToOne Rewrite all destination IPs to a single IP. (Default:
No)
AppControl Application Control. (Default: No)
AC_Mode Application Control mode. (Default: UsePolicy)
AC_RuleSet Selects preconfigured Application Rule.
AC_AppAction Allow or Deny selected applications. (Default:
Allow)
AC_Applications List of applications to match.
LogEnabled Enable logging. (Default: Yes)
LogSeverity Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
207
To Next Page
Loading...
