Usage
arpsnoop
Show snooped interfaces.
arpsnoop {ALL | NONE | <interface>} [-verbose]
Snoop specified interface.
Options
-verbose Verbose.
{ALL | NONE | <interface>} Interface name.
Note
Requires Administrator privileges.
2.2.6. ats
Show active ARP Transaction States.
Description
Show active ARP Transaction States.
Usage
ats [-num=<n>]
Options
-num=<n> Limit list to <n> entries. (Default: 20)
2.2.7. authagent
Shows the state of the Authentication Agents.
Description
Shows the state of the Authentication Agents.
Usage
Chapter 2: Command Reference
36
To Next Page
Loading...
