last in the list and the Index will be equal to the length of the list.
3.29.1. DynamicRoutingRuleExportOSPF
Description
An OSPF action is used to manipulate and export new or changed routes to an OSPF Router
Process.
Properties
ExportToProcess Specifies to which OSPF Process the route change
should be exported.
SetTag Specifies a tag for this route. This tag can be used
in other routers for filtering. (Optional)
SetRouteType The external route type. (Optional)
OffsetMetric Increases the metric of the imported route by this
value. (Optional)
LimitMetricRange Limits the metrics for these routes to a minimum
and maximum value, if a route has a higher or
lower value then specified it will be set to the
specified value. (Optional)
SetForward IP to route over. (Optional)
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
3.29.2. DynamicRoutingRuleAddRoute
Description
A routing action is used to manipulate and insert new or changed routes to one or more local
routing tables.
Properties
Destination Specifies to which routing table the route changes
to the OSPF Process should be exported.
OverrideStatic Allow override of static routes. (Default: No)
OverwriteDefault Allow overwrite of default route. (Default: No)
Chapter 3: Configuration Reference
159
To Next Page
Loading...
