D-Link DFL-870

[-protocol=<name/num>] [-srcport=<port>]
[-destport=<port>]
List connections.
connections
Same as "connections -show".
connections -close [-all] [-srciface=<interface>]
[-destiface=<interface>] [-ipver={IPV6 | IPV4}]
[-srcip=<ip address>] [-destip=<ip address>]
[-protocol=<name/num>] [-srcport=<port>]
[-destport=<port>]
Close connections.
Options
-all Mark all connections.
-close Close all connections that match the filter
expression. (Admin only)
-destiface=<interface> Filter on destination interface.
-destip=<ip address> Filter on destination IP address.
-destport=<port> Filter on TCP/UDP destination port.
-ipver={IPV6 | IPV4} Filter on IP version.
-num=<n> Limit list to <n> connections. (Default: 20)
-protocol=<name/num> Filter in IP protocol.
-show Show connections.
-srciface=<interface> Filter on source interface.
-srcip=<ip address> Filter on source IP address.
-srcport=<port> Filter on TCP/UDP source port.
-verbose Verbose (more information).
2.2.16. cpuid
Display info about the cpu.
Description
Display the make and model of the machine's CPU.
Usage
cpuid
Chapter 2: Command Reference
42