3.107. RouterAdvertisement
Description
Enabling Router Advertisement will answer Solicitations and periodically send out
Advertisements. Stateless address autoconfiguration (SLAAC) will only work correctly if the
configured network prefix is 64 (RFC4862).
Properties
Index The index of the object, starting at 1. (Identifier)
Name Specifies a symbolic name for the Router
Advertisement.
Interface Specifies the name of the interface to advertise on.
UseGlobalRASettings Use global RA advanced settings. (Default: Yes)
RAMaxInterval Maximum time between sending unsolicited
multicast Router Advertisement. (Default: 600s).
(Default: 600)
RAMinInterval Minimum time between sending unsolicited
multicast Router Advertisement. Will be
automatically adjusted if set to less than 3 seconds
or greater than .75 * Max RA Interval). (Default: 200)
RAAutoLifetime Auto adjust the Router Lifetime field using the
following formula; 3 * MaxRtrAdvInterval. (Default:
Yes)
RADefaultLifetime The value to be placed in the Router Lifetime field
of Router Advertisements sent from the SGW, in
seconds. (Default: 1800s). (Default: 1800)
RAReachableTime The value to be placed in the Reachable Time field
in the Router Advertisement messages SGW. The
value zero means unspecified. (Default: 0s).
(Default: 0)
RARetransTimer The value to be placed in the Retrans Timer field in
the Router Advertisement messages sent by the
SGW. The value zero means unspecified. (Default:
0s). (Default: 0)
RAManagedFlag Indicates that addresses are available via DHCPv6.
(Default: False). (Default: No)
RAOtherConfigFlag Indicates that other configuration information is
available via DHCPv6. (Default: False). (Default: No)
RACurHopLimit The default value to be placed in the Cur Hop Limit
field in the Router Advertisement messages sent
by the SGW. The value zero means unspecified.
(Default: 64). (Default: 64)
RALinkMTU The value to be placed in MTU options sent. A
value of zero indicates that no MTU options are
Chapter 3: Configuration Reference
281
To Next Page
Loading...
